Thursday, March 25, 2010

science



If I could go back in time I would tell myself about bar charts and energy transfer. Bar charts show energy transfer by showing work, initial states, and final states. It shows hat the energy was conserved (something did work on it and has a change in energy) or constant (the energy stays at the same amount before and after but can still transfer). bar charts show how much kinetic gravitational and elastic energy to start. Then, it shows how much work was done on the system. in the last area it shows the change from the beginning in kinetic, gravitational, elastic and change in internal energy. Below is an example of a bar chart.


Saturday, March 6, 2010

energy and matter


If I could go back in time and talk to myself about transferring energy and types of energy, I would tell myself that you can transfer energy in four ways. There is kinetic energy (moving energy), Gravitational potential energy (lifting/falling energy), elastic potential energy (accelerating energy), and internal energy (warming/cooling energy). An example of two of these is if you throw a ball into the air, at the peak of its flight it has gravitational potential energy and when it is about to hit the ground, it has kinetic energy. Also, a girl pulling a box has internal energy and kinetic energy. It has kinetic energy because it is moving and internal energy because the box it creating heat against the floor. If someone was going up on a trampoline, but hadn't left it yet, they would have elastic potential energy. The experiment that seemed to help me the most with this idea was the elephant on the trampoline. below I have a picture of this.


Friday, February 5, 2010

Comparing and Contrasting Inner/Outer Planets

  • Inner planets are Mercury, Venus, Earth, and Mars
  • Outer planets are Jupiter, Saturn, Uranus, and Neptune
  • Dwarf planets are Pluto and Eris
  • Inner and outer planets are separated by the steroid belt
  • Inner planets are called terrestrial planets
  • All inner planets have Volcanic land-forms
  • All planets have polar phenomena (Wind on the planet)

Characteristics of the moon

  • Craters- Areas formed when meteors hit the moon
  • Rays- Rock splashed up from meteor hits
  • Marias- Large, dark, hole like features on the moons surface. Like an ocean bed.
  • Mountains- Like the ones on Earth. Easiest to see on the outer edge of Maria.
  • Rilles- Long channels of lava that have collapsed after the lava went away
  • Lunar highlands- Lighter part of the near-side.
  • Near-side- The side of the moon we always see/the side that is closest to us.
  • Far-side- the side that we never see/the side farthest from us.

Causes for planetary Orbits

Planets and other objects go into orbit because they pass through the pull of a larger planet/object in space and is moving at the right speed in the right direction. It must always be moving parallel to the larger planet/object to go into orbit. The closer to the larger Planet/object, the faster the orbiting object must move.

Comparisons of Comets/Meteors and Meteorites
  • Comets- Mostly made up of ice and gas. Smaller than meteors and meteorites.
  • Meteors- Move at very high speeds. Large. Burn up in atmosphere.
  • Meteorites- objects that reach, and hit, the earths surface
Below is a link to a video of the Leonid meteor shower http://www.youtube.com/watch?v=Ir8U22_tzu8&feature=related

Friday, January 22, 2010

Astronomy





This week in science, we learned about why planets orbit instead of just flying into the planet that they are orbiting. In class, we created a force diagram of a planet orbiting another, bigger, planet. It looked like the force diagram below.

Since it is true that the only force acting on it is the planet, why doesn't it crash? It does not crash because of its initial velocity. It is like tossing a ball in the air. You pause time while it is in mid flight moving upward. Even though there are no forces acting on it at the time, it does not mean that it will stop in mid air. Because of the initial velocity, it keeps moving upward. Because of the initial velocity, the orbiting planet wants to go one way and the planet it is orbiting is pulling it another way. This causes it to end up going in between the two forces. Here is a drawing/example of what I mean.

How does a planet get into orbit in the first place? To get a planet into orbit, it needs initial velocity and a certain direction of that velocity. It depends where the direction is and how high the velocity is depending on where the planet is. If it is close to the bigger planet, the velocity should be high. The farther away that it gets, the less the velocity. no matter where it is, the planets direction needs two be perpendicular, or at least close to it, to get into an orbit. I have found a website that also explains this idea pretty well. I have posted the link below.

Tuesday, January 19, 2010

Seasons



Why do we have seasons?

There are many things that help to cause the seasons. unlike what most people believe it does not have to do with he distance between the earth and the sun. We have seasons because of the angle of the earth and where the indirect and direct rays hit on the earth. There is a picture and explanation below.


Friday, January 8, 2010

Astronomy week 1





What science ideas did you learn?

This week in science we learned about the different phases of the moon, what rotate and revolve mean, what rotates and revolves, and why there are waves in the ocean.

How did you learn these ideas?

We learned how to remember the different phases of the moon in a way that Mr. Finley showed us. There is a picture of what this looked like below.

Rotate-To spin

Revolve- To move in a circle around something or someone.

What in space rotates?- The earth rotates in place in comparison to the moon.
What in space revolves?- The moon rotates and revolves around the earth which is rotating and revolving around the sun.

How are waves made?

Waves in the ocean are created mainly by the moons pull on the earth. the sun plays a small role in the creation of waves as well. below is a force diagram of the pull of the moon sun and earth.


What real world application is there?

The real world application is that if we did not have the moon we would have very small to no waves in the ocean if we did not have the moon.

Saturday, December 19, 2009



What science ideas did you learn?

This week in science we learned Newton's third law (Every action has an equal and opposite reaction).

How did you learn these ideas?

We learned this week that Newton's law is that very action has has an equal and opposite reaction. We learned this by seeing Cathy and Laura sit on two different carts facing each other. Cathy then put her feet on Laura's knees and pushed Laura as hard as she could. But not only Laura moved when Cathy pushed her, but Cathy moved too. This shows that Laura also pushed Cathy, as Cathy pushed Laura. This proved to us that Newton's third law is true.

What real world application is there?

This video I found shows some examples of Newton's third law

Saturday, December 12, 2009





What science ideas did you learn?

This week in science class we learned about peoples weight on the moon and in a elevator. We also talked about why the moon has less pull than the earth.

How did you learn these ideas?

If you were to enter an elevator and stand on a scale, then have the elevator start moving up. You would see that your weight went up. If the elevator then started to move down, your weight would decrease. If the elevator moved at a steady rate and then stopped, your weight would remain unchanged. We also learned that the moon has less of a pull than earth. this is because it is less massive. We learned that the more mass an object has,the less the acceleration it has. Also that the greater the force on an object, the greater the acceleration.

What real world application is there?

If you saw that there was a man pushing a chair across the floor, You would know that a force diagram for this situation would look like this.


Friday, December 4, 2009





What science ideas did you learn?

This week we learned how to make force diagrams for different situations. Such as a man holding a basketball, or Mr. Finley dragging Adytia across the ground. We learned that all objects can generate force. We also got to go outside and push Mr. Finley's car as an experiment.

How did you learn these ideas?

For the question/situation of a  man holding a basketball, here is a picture, force diagram, and a Number sentence.  The man is able to hold the basketball stationary because the force of the hand on the ball is equal to the force of the hand on the ball.

For the situation of Mr. Finley Dragging Adytia across the ground, here is a picture, number sentence, and force diagram. Mr. was able to drag Adytia across the floor because he generated more force than the force of the surface of the floor on him. The force of the floor on Adytia and the force of the earth on Adytia equaled each other and did not effect Mr. Finley's ability to drag Adytia.

What real world application is there?

I thought of two real world ideas about force. These are bowling, and tug of war. If you are bowling, you would need the force you give to the ball to be greater than the force of the surface of the ground to be able to reach the pins. In tug of war, both sides have the same force of the earth and force of the ground on them. The force of the strongest team will decide who is the winner.

Sunday, November 22, 2009


What science ideas did you learn?
We learned how to make the different types of motion diagrams.

How did you learn these ideas?
You can create a motion diagram for almost every situation. For example, if a man was jogging down at a steady pace from the start. but eventually got tired and slowed down, the diagram would look like this.

Or, if a bungee jumper jumped off a bridge, it would look like this.

What real world application is there? 

A car starting at a red light moves at a steady pace and approaches, then passes through a yellow light.

Thursday, November 5, 2009





What science ideas did you learn?
  • We learned how to find slope
  • How to use variables to represent time and position, or how fast something or someone is going.


How did you learn these ideas? 

  • You find slope by dividing the vertical change by the horizontal change. Here is an example of what slope may look like.
5
_______           position over time

1
What real world application is there?

Slope affects me as a snowboarder because the the colors of the hill(Green circle-easiest, Blue square-difficult, black diamond-very difficult, double black diamond-extremely difficult, orange rectangle-freestyle). The difficulty of the hill is probably scientifically found by using slope.


Sunday, November 1, 2009

Science





What Science ideas did I learn?

  • Physical quantities
  • Making graphs, tables, and dot diagrams
  • Used a machine that measured distance

How did I learn these ideas?

  • We learned that a physical quantity is any unit of measure. For example, inches, quarts, pounds, miles, degrees, seconds, hours, celsius, kilometers, grams, kilograms, etc.

  • This week we learned how to and made many graphs, table, and dot diagrams of different things we saw, such as Mr. Segen walking across the room. In the pictures bellow are some examples of what some of the dot diagrams, tables, and graphs, may have looked like.
  • On Friday we got to use the machines that measured time and distance. You could aim it at someone or something moving and when the time was up it would create a graph of the distance the thing was from it at specific time. It not only did that, but it could combine any graphs it recorded into one graph. The experiment my group did was that Andrew would run close to it and then away and then repeat it until it stopped recording. The graph we recorded was very interesting. It looked like this.

Saturday, October 24, 2009


What science ideas did you learn?

1.We tested to find out which is more helpful, north, south, east, and west or right and left.

2.We also tried to find different ways to communicate direction. (Other than north, south, east, and west and right and left.)

3. We wanted to find out how the motorized car traveled. Did it speed up as it drove, slow down, or keep a steady pace?

How did you learn these ideas?

1. Which is more helpful, north, south, east, and west, or right and left? We tested this by first getting a partner. Then we faced each other and pointed left. Then we faced the front of the class and pointed left. When we faced the front of the class we both pointed in the same direction, but when we faced each other and pointed left, we were pointing in different directions. Then we faced each other again but this time pointed west. After that we faced the front of the class and pointed west. When we did that, we were pointing the same direction both times. This let me conclude that north, south, east, and west is more useful for using direction than pointing left or right.

2. What other ways can you communicate direction? (other than N,S,E, and W or right and left). In class we came up with a different way to use direction. We used the idea of a coordinate grid. One direction was X, left horizontally, and Y, vertically or up and down. We also used positive and negative to use direction.


In the picture above, the person is moving in the X positive(X+) direction.

3. Last, does the motorized car speed up as it travels, slow down, or keep a steady pace?  We tested this by letting the car start going at a specific point. Then, after every second, draw a line in front of the car. After four seconds, we measured the space between each line. The bigger space per second the faster the car was moving. The smaller the space between each line, the slower the car moved. these are our results- Second 1=30 inches, second 2=19 1/2 inches, second 3=20 inches, and second four=22 1/2 inches. This led me to conclude that the car sped up for a short time, but then slowed to a steady pace.

What real world application is there?

If you have seen an accident and are giving a police report, or are explaining to a 911 operator were you are, it would be much more helpful to use North, South, East, and West, rather that right and left. If you use compass directions you could give a very helpful police report, or have 911 find you easily. With right and left there would be to much of, " My right, or your right?". The police need me to tell them " I am on the west bound lane of interstate 78" or, "The car was traveling west through he intersection".

Monday, October 19, 2009

Week of the 10/12 through 10/16

What science ideas did you learn?

This week we learned about opaque. translucent, and transparent surfaces. We also learned and tested how light is like a slinky. Last, we found out how a laser would shine when shown into a triangular prism.

How did I learn these ideas?

Opaque Surface- If a surface is opaque, light cannot pass through and it must reflect off. 
Examples- Table, wall, and wood.
Translucent Surface- If a surface is translucent, some light is able to pass through it, or 
refract, and some reflects. Examples- Paper, tinted windows.
Transparent Surface- If a surface is transparent, most or all of the light is able to pass 
through it. Examples- Water, Glass.
Slinkies and Light- We tested how light was like a slinky. We did this by connecting a thick 
slinky to represent water or glass, and a thin slinky to represent air. When we put a wave 
through the thin slinky first, then through the thick slinky, the wave started fast and big. When 
it hit the thick slinky, it got smaller and slowed down. When we reversed the experiment and 
started the wave with the thick slinky and then through the thin slinky, the wave was small and 
slow, but sped up and got bigger when it hit the thin one. We also noticed that the main wave 
would carry through the whole slinky combination, but a smaller one would stoop half way and 
bounce back to the start. This happened in both experiments. This demonstrated how light is 
like a slinky because the wave in the slinky traveled the same from thick to thin, as light waves
would travel from water to air. The reverse is also true.
What happens when a laser is shined into a triangular prism?- When the laser shined 
through he triangular prism, the beam bounced off of the sides of the glass and back to where it 
entered. 

What real world application is there?

Sunglasses are an excellent example of how light travels through translucent surfaces. By 
limiting the amount of light that can refract through the lens, sunglasses protect our eyes from 
dangerous and uncomfortable amounts of sunlight.


Thursday, October 8, 2009

Light waves


What Science ideas did you learn? 

We learned about Newton's and Huygen's ideas about light. Newton believed that light is made up of particles and moves in rays. Huygens believed that light is made up of waves, such as the ripples you see in water when it is moved by and object. We also came up with the idea that light has no weight.

How did you learn these ideas?

We tested Christiaan Huygen's idea that light travels in waves. First, we put Mr. Seagens laptop very close to the projector, studied the shadow and took notes on what we saw. Next, we put the laptop very  close to the  wall with the projector shining on it. We then studied that shadow and took notes on what we observed. When we put the laptop close to the projector, the shadow was very big, but had blurry edges. When we put the laptop close to the wall, the shadow was about the same size as the actual laptop and also had a much cleaner edge than the shadow when the laptop was close to the projector. We tested this again by putting a block in the middle of a sink filled with water. We then dropped water next to it to see how the ripples reacted when they hit the block. The water block would serve as the light source,  the block as the laptop, and the ripples in the water as the light waves. the ripples seemed to split as they hit the block and bounced off of everything they hit. Next we tested the idea that light has no mass. We tested this by shining a flashlight onto a scale. We set the scale to it's most sensitive setting and shined the flashlight onto it. The scale showed no change in weight so we concluded that light has no mass.

What real world application is there?

A camera is a great example of how we use our understanding that light travels in rays instead of waves. In the article "How does a camera work?" in Yes Mag science magazine written by Stephen Whitt, he gives a great explanation f how a camera works.

"One kind of camera — which can be either a digital camera or a traditional film camera — is called a single-lens reflex (SLR) camera. In this camera, there is only a single set of lenses for both viewing and photographing an image. Let’s say you spot your dolphin and lift your camera to your eye. What happens?

First, light bouncing off the dolphin passes into the camera, through a set of lenses, and onto a mirror. From there, the light bounces up and into a funny-shaped piece of glass called a pentaprism (penta means five, and the pentaprism has, you guessed it, five sides). Once light enters the pentaprism, it bounces around in a complicated way until it passes through the eyepiece and enters your eye.

The dolphin is swimming just below the water, but you have a feeling it’s about to surface. Wait for it, wait for it…there! You snap the picture. When you press the button on the camera, the mirror flips up out of the way. Instead of bouncing into the pentaprism, light from the dolphin passes directly to the back of the camera. There, it either hits photographic film and starts a chemical reaction, or else it impacts an array of light-sensitive cells that release a tiny electric charge in each activated cell. Either way, even though the dolphin’s long gone, you’ve captured its image. Congratulations!"

If light traveled in waves, the technology used by a camera would be completely different.


Saturday, October 3, 2009

10/2 How light rays travel


What science ideas did you learn?

This week we covered many ideas of how light rays travel.  First of all, we wanted to know how light travels.  We came up with 5 ideas to test this.  Secondly, we wanted to find out if something had high or low focus.  Thirdly, we needed to find the angles at which the light bounced off a mirror. The first angle we wanted to find was called 'angle A' or the 'angle of incidence'.  The second angle we wanted to find was called 'angel B' or the 'angle of reflection'.  As an extra, my group wanted to know what made the laser reflect off the water.  We wanted to know if the water reflected the laser, the pan reflected the laser, or if it was a combination of the two.  

How did you learn these ideas?

1.  How does light travel?  We were able to eliminate 3 of the 5 hypothesis of how light travels in class.  We were able to eliminate hypothesis A because light does not travel backwards.  By shining the laser on a mirror at an angle, the light bounced off at an angle except when the laser was pointed straight in the mirror.  Next we eliminated hypothesis C, that a light ray stays intact as it travels, because if it were true, everything we see would be doubled, tripled, or quadrupled.  Finally, we eliminated hypothesis D, which was a larger scale version of C.  Hypothesis B and E were left.  Hypothesis B is that one ray of light hits and object and bounces into our eye as one ray.  Hypothesis E is that millions of rays hit an object and bounce into our eye.  I believe hypothesis E is correct because with hypothesis B, we would only see one very small point of the object. With hypothesis E, the millions of rays would work together to make a complete image for my eye to see.  

2. High Focus vs. Low Focus.  We also tested if certain objects had high focus or low focus.  We did this by seeing how reflective, or clear, certain objects are by shining the laser at them.  The more clear, or reflective, of the laser, the higher the focus.  The less reflective objects would be low focus.  Examples of high focus items such as glass, mirrors, water, or clear plastic.  Low focus items include wooden desks, pieces of paper, the wall, and clothing.

3. Measuring angles of light.  We tested what angle the laser pointer bounced by using a mirror, a laser pointer, two erasers, and a protractor.  First, we laid the mirror face up on the table and clapped the erasers over the mirror to create dust.  The dust allowed us to see the laser path.  We shone the laser at different angles and used the protractor to measure the angle of incidence, angle A, and the angle of reflection, angle B.  Lastly, we recorded the measurements in our notebook and repeated the process 9 more times.  I expected that angle A would be the same as angle B, but in our experiment this was not true.  

4.  Water reflection.  We tested this by shining the laser pointer in the clear, plastic pan when it was empty and dry.  The laser reflected off the pan onto the ceiling.  Then, we made a puddle of water on the table (a low focus object) and reflected the laser off the puddle.  It also reflected off the puddle and onto the ceiling.  When we added water to the pan, it made two dots on the ceiling in different spots.  One was large and fuzzy, and the other was smaller and clearer.  I think this is because some of the rays hit the surface of the water and bounced directly onto the ceiling creating the small clear dot.  Other light rays traveled further, through the water, and reflected off the bottom of the pan.  If the water wasn't perfectly still, the rays may have changed direction somewhat as they reflected off the bottom of the pan and up through the surface of the water.  This would explain the larger, less clear spot.  

Saturday, September 26, 2009

How do light rays travel?

What science ideas did you learn?

This week we learned a lot of science ideas. First we wanted to find out how we could see a marker. Does the light hit our eyes and then the marker, does the light hit the marker and then reflect into our eyes, or does light have nothing to do with it at all and we can just see the marker. Next we wanted to find out why when the candle light went through the small hole, it showed up on the wall upside down. Then, when the light went through the hole bigger than the flame, the spot on the wall was the shape of the bigger hole. Last, we wanted to find out why when we shined the laser pointer on a mirror, the dot on the mirror was extremely small, but the reflected dot on the wall was much bigger than usual.

How did you learn these ideas?

We immediately were able to cross off the idea that light had nothing to do with us seeing the marker.  We already did an experiment to test if we could see without light, and none of us could.  We couldn't quite think of a way to test the other hypotheses of how we could see the marker.  Our hypothesis for the candle light going through the hole in the cardboard was that the light rays cross.  The top rays go down, and the bottom rays shine up.  This is why the reflection on the wall appears upside down.   We wanted to know if the light rays crossed before or after the hole in the cardboard.  We tested this by having someone slide their finger in front of the hole to see what affect the shadow had on the reflection.  (see illustration)  Since the reflection of the candle flame was upside down, we could tell at what point the light rays crossed.

Why is it important to know this idea (What real world application is there)? 

It is important to understand how light rays travel and reflect on objects enabling us to see images.  If we didn't understand this, important technology we use every day would not exist.  The microscope works by shining an intense light through a small object into an objective lens which is magnified by the ocular lens so we see the object clearly.  The microscope allows us to see organisms smaller than our eyes could see, such as bacteria or paramecium.  Science and medicine would not be the same without the microscope.

Another important technology using our understanding of how we see is the telescope.  Unlike the microscope which has its own light source, the telescope works by gathering its light from dim, far away objects with a very large objective lens.  We use telescopes, like the Hubbell telescope, to explore objects in deep space otherwise invisible to us.  

Friday, September 18, 2009

Light

What science ideas did you learn?

I learned that air particles could either be invisible and not reflect the laser pointer, or the air particles could reflect but be too small for our eyes to see the reflection. I also learned that there may be one  ray of light coming from one point on a light bulb, or millions of rays coming from one point on a light bulb. I believe that there are millions of rays coming from one spot making it seem as if it were one big ray. We also had the ideas that you either could not see in the dark, or that your eyes would eventually adjust.

How did you learn these ideas?

I learned these ideas in many ways. I learned them in class discussion, my table, my own observations, and from experiments. For example, the experiment whether you can or can't see without light. We tested it by covering a side of Mr. Finley's desk with a black sheet, turned off all the lights, and put a sign on the inside of the desk. Then we went inside and tried to read the sign. No ones eyes could adjust and no one could read the sign. This led me to believe that there must be a small amount of light to reflect into my eye to allow me to see. 
In the laser pointer experiment we sprinkled chalk and flour above the laser to let us see the laser. The particles of flour and chalk reflected the light from the laser into our eyes enabling us to see the laser beam that was invisible to our eyes before. I concluded that air particles do reflect light but are too small for us to be able to see the reflected light.

Why is it important to know this idea?

It is important to understand how our eyes work. If there is no light to reflect in my eyes, then I can not see. This is important to understand because if injury or disease damage the reflecting lenses in my eyes i would end up blind.  I also understand why it would be important to take a light source into situations without natural light such as deep sea and deep cave explorations. This also explains to me why some animals living in these environments have no eyes or have lost the use of their eyes.

Click on the link below to view a national geographic article about a cave  fish that lost the use of it's eyes:



Saturday, May 30, 2009

This week in science class

Monday: We had no school on Monday Because it was Memorial Day.

Tuesday: On Tuesday the documentary group had to finish watching the documentaries and taking notes. The classifications group/ Carolus Linneus group also had to finish. I was in the documentary group. I learned about all of the relatives of humans or hominids.

Wednesday: On Wednesday we switched groups. Now I was in the classification group/ Carolus Lineus group.  We learned about Carolus Lineus, Classification, and bionemalnomenclature, the art of classification. We also learned that Carolus Linneus' real name was Carol Linne. He changed his name to Latin which is also what he did to name his classification groups. For example, he changed animals to animelia.

Thursday: We had to complete the Carolus Linneus packet by Friday.

Friday: We discussed the packet that we did on Carolus Linneus with the class. Then we had a two minute discussion on food chains/food webs. Last, we had to watch videos about when it was illegal to teach about evolution in public schools. For homework we had to blog.

Saturday, May 23, 2009

This Week In Science Class

This week in science, we learned a lot.  We learned about Gene Flow, Genetic Drift, The Lamarkian Theory of Evolution, The Darwinian Theory of Evolution, Mutation, Genetic Engineering, Selective Breeding or Unnatural Selection, and About hominids.  Gene Flow is Change in a population through migration.  For example, say a bunch of people from Australia go to India.  Then they will have children.  This causes the change in population through migration. Genetic Drift is a change in a population because of chance.  There are a bunch of red bugs and black bugs in the grass.  The only difference between the bugs is the color.  Then a random tree falls and kills all of the red bugs.  Neither of the bugs had a better or worse chance of survival. This is why it is a change in population because of chance.  The Lamarkian Theory of Evolution is that if you try really hard to do something, eventually in your lifetime, it will happen.  Then if your mate has done the same, your children will be born with that trait.  But, if you don't use it it will slowly shrink and eventually disappear.   For example, this is saying that if a man and woman work out a lot and try hard to get big muscles, eventually in their lifetime, they will get it.  And if they get married and have kids, their children will be born with big muscles.  The Darwinian Theory of Evolution is that even if you and your husband/wife work out for a few years, your children will be born with the traits that you originally started out with, and they will have to work just as hard as you to become as strong.  A mutation is a sudden, random change in the DNA of the being.  It can be good or bad for the animal.  Genetic Engineering is genetically changing the DNA of an animal.  Selective Breeding, or Unnatural Selection, is humans choosing the trait that they like best in an animal and only breeding the ones they like best.  We also learned about hominids.  Hominids are the ancestor/relatives of humans and primates.  They are also known as great apes.  They are large, tailless and omnivorous, which means they eat meat and plants.  They were also the first group of organisms to walk upright.  Humans did not evolve from the primates of today.  But, the closest organism to humans is the chimpanzee.  This does not mean that all chimpanzee's will evolve into humans.  Africa was the first continent to hold life of hominids.  Last, on Friday we took a quiz on Gene Flow, Genetic Drift, The Lamarkian Theory of Evolution, The Darwinian Theory of Evolution, and mutations.