Sunday, November 1, 2009

Science





What Science ideas did I learn?

  • Physical quantities
  • Making graphs, tables, and dot diagrams
  • Used a machine that measured distance

How did I learn these ideas?

  • We learned that a physical quantity is any unit of measure. For example, inches, quarts, pounds, miles, degrees, seconds, hours, celsius, kilometers, grams, kilograms, etc.

  • This week we learned how to and made many graphs, table, and dot diagrams of different things we saw, such as Mr. Segen walking across the room. In the pictures bellow are some examples of what some of the dot diagrams, tables, and graphs, may have looked like.
  • On Friday we got to use the machines that measured time and distance. You could aim it at someone or something moving and when the time was up it would create a graph of the distance the thing was from it at specific time. It not only did that, but it could combine any graphs it recorded into one graph. The experiment my group did was that Andrew would run close to it and then away and then repeat it until it stopped recording. The graph we recorded was very interesting. It looked like this.

Saturday, October 24, 2009


What science ideas did you learn?

1.We tested to find out which is more helpful, north, south, east, and west or right and left.

2.We also tried to find different ways to communicate direction. (Other than north, south, east, and west and right and left.)

3. We wanted to find out how the motorized car traveled. Did it speed up as it drove, slow down, or keep a steady pace?

How did you learn these ideas?

1. Which is more helpful, north, south, east, and west, or right and left? We tested this by first getting a partner. Then we faced each other and pointed left. Then we faced the front of the class and pointed left. When we faced the front of the class we both pointed in the same direction, but when we faced each other and pointed left, we were pointing in different directions. Then we faced each other again but this time pointed west. After that we faced the front of the class and pointed west. When we did that, we were pointing the same direction both times. This let me conclude that north, south, east, and west is more useful for using direction than pointing left or right.

2. What other ways can you communicate direction? (other than N,S,E, and W or right and left). In class we came up with a different way to use direction. We used the idea of a coordinate grid. One direction was X, left horizontally, and Y, vertically or up and down. We also used positive and negative to use direction.


In the picture above, the person is moving in the X positive(X+) direction.

3. Last, does the motorized car speed up as it travels, slow down, or keep a steady pace?  We tested this by letting the car start going at a specific point. Then, after every second, draw a line in front of the car. After four seconds, we measured the space between each line. The bigger space per second the faster the car was moving. The smaller the space between each line, the slower the car moved. these are our results- Second 1=30 inches, second 2=19 1/2 inches, second 3=20 inches, and second four=22 1/2 inches. This led me to conclude that the car sped up for a short time, but then slowed to a steady pace.

What real world application is there?

If you have seen an accident and are giving a police report, or are explaining to a 911 operator were you are, it would be much more helpful to use North, South, East, and West, rather that right and left. If you use compass directions you could give a very helpful police report, or have 911 find you easily. With right and left there would be to much of, " My right, or your right?". The police need me to tell them " I am on the west bound lane of interstate 78" or, "The car was traveling west through he intersection".

Monday, October 19, 2009

Week of the 10/12 through 10/16

What science ideas did you learn?

This week we learned about opaque. translucent, and transparent surfaces. We also learned and tested how light is like a slinky. Last, we found out how a laser would shine when shown into a triangular prism.

How did I learn these ideas?

Opaque Surface- If a surface is opaque, light cannot pass through and it must reflect off. 
Examples- Table, wall, and wood.
Translucent Surface- If a surface is translucent, some light is able to pass through it, or 
refract, and some reflects. Examples- Paper, tinted windows.
Transparent Surface- If a surface is transparent, most or all of the light is able to pass 
through it. Examples- Water, Glass.
Slinkies and Light- We tested how light was like a slinky. We did this by connecting a thick 
slinky to represent water or glass, and a thin slinky to represent air. When we put a wave 
through the thin slinky first, then through the thick slinky, the wave started fast and big. When 
it hit the thick slinky, it got smaller and slowed down. When we reversed the experiment and 
started the wave with the thick slinky and then through the thin slinky, the wave was small and 
slow, but sped up and got bigger when it hit the thin one. We also noticed that the main wave 
would carry through the whole slinky combination, but a smaller one would stoop half way and 
bounce back to the start. This happened in both experiments. This demonstrated how light is 
like a slinky because the wave in the slinky traveled the same from thick to thin, as light waves
would travel from water to air. The reverse is also true.
What happens when a laser is shined into a triangular prism?- When the laser shined 
through he triangular prism, the beam bounced off of the sides of the glass and back to where it 
entered. 

What real world application is there?

Sunglasses are an excellent example of how light travels through translucent surfaces. By 
limiting the amount of light that can refract through the lens, sunglasses protect our eyes from 
dangerous and uncomfortable amounts of sunlight.


Thursday, October 8, 2009

Light waves


What Science ideas did you learn? 

We learned about Newton's and Huygen's ideas about light. Newton believed that light is made up of particles and moves in rays. Huygens believed that light is made up of waves, such as the ripples you see in water when it is moved by and object. We also came up with the idea that light has no weight.

How did you learn these ideas?

We tested Christiaan Huygen's idea that light travels in waves. First, we put Mr. Seagens laptop very close to the projector, studied the shadow and took notes on what we saw. Next, we put the laptop very  close to the  wall with the projector shining on it. We then studied that shadow and took notes on what we observed. When we put the laptop close to the projector, the shadow was very big, but had blurry edges. When we put the laptop close to the wall, the shadow was about the same size as the actual laptop and also had a much cleaner edge than the shadow when the laptop was close to the projector. We tested this again by putting a block in the middle of a sink filled with water. We then dropped water next to it to see how the ripples reacted when they hit the block. The water block would serve as the light source,  the block as the laptop, and the ripples in the water as the light waves. the ripples seemed to split as they hit the block and bounced off of everything they hit. Next we tested the idea that light has no mass. We tested this by shining a flashlight onto a scale. We set the scale to it's most sensitive setting and shined the flashlight onto it. The scale showed no change in weight so we concluded that light has no mass.

What real world application is there?

A camera is a great example of how we use our understanding that light travels in rays instead of waves. In the article "How does a camera work?" in Yes Mag science magazine written by Stephen Whitt, he gives a great explanation f how a camera works.

"One kind of camera — which can be either a digital camera or a traditional film camera — is called a single-lens reflex (SLR) camera. In this camera, there is only a single set of lenses for both viewing and photographing an image. Let’s say you spot your dolphin and lift your camera to your eye. What happens?

First, light bouncing off the dolphin passes into the camera, through a set of lenses, and onto a mirror. From there, the light bounces up and into a funny-shaped piece of glass called a pentaprism (penta means five, and the pentaprism has, you guessed it, five sides). Once light enters the pentaprism, it bounces around in a complicated way until it passes through the eyepiece and enters your eye.

The dolphin is swimming just below the water, but you have a feeling it’s about to surface. Wait for it, wait for it…there! You snap the picture. When you press the button on the camera, the mirror flips up out of the way. Instead of bouncing into the pentaprism, light from the dolphin passes directly to the back of the camera. There, it either hits photographic film and starts a chemical reaction, or else it impacts an array of light-sensitive cells that release a tiny electric charge in each activated cell. Either way, even though the dolphin’s long gone, you’ve captured its image. Congratulations!"

If light traveled in waves, the technology used by a camera would be completely different.


Saturday, October 3, 2009

10/2 How light rays travel


What science ideas did you learn?

This week we covered many ideas of how light rays travel.  First of all, we wanted to know how light travels.  We came up with 5 ideas to test this.  Secondly, we wanted to find out if something had high or low focus.  Thirdly, we needed to find the angles at which the light bounced off a mirror. The first angle we wanted to find was called 'angle A' or the 'angle of incidence'.  The second angle we wanted to find was called 'angel B' or the 'angle of reflection'.  As an extra, my group wanted to know what made the laser reflect off the water.  We wanted to know if the water reflected the laser, the pan reflected the laser, or if it was a combination of the two.  

How did you learn these ideas?

1.  How does light travel?  We were able to eliminate 3 of the 5 hypothesis of how light travels in class.  We were able to eliminate hypothesis A because light does not travel backwards.  By shining the laser on a mirror at an angle, the light bounced off at an angle except when the laser was pointed straight in the mirror.  Next we eliminated hypothesis C, that a light ray stays intact as it travels, because if it were true, everything we see would be doubled, tripled, or quadrupled.  Finally, we eliminated hypothesis D, which was a larger scale version of C.  Hypothesis B and E were left.  Hypothesis B is that one ray of light hits and object and bounces into our eye as one ray.  Hypothesis E is that millions of rays hit an object and bounce into our eye.  I believe hypothesis E is correct because with hypothesis B, we would only see one very small point of the object. With hypothesis E, the millions of rays would work together to make a complete image for my eye to see.  

2. High Focus vs. Low Focus.  We also tested if certain objects had high focus or low focus.  We did this by seeing how reflective, or clear, certain objects are by shining the laser at them.  The more clear, or reflective, of the laser, the higher the focus.  The less reflective objects would be low focus.  Examples of high focus items such as glass, mirrors, water, or clear plastic.  Low focus items include wooden desks, pieces of paper, the wall, and clothing.

3. Measuring angles of light.  We tested what angle the laser pointer bounced by using a mirror, a laser pointer, two erasers, and a protractor.  First, we laid the mirror face up on the table and clapped the erasers over the mirror to create dust.  The dust allowed us to see the laser path.  We shone the laser at different angles and used the protractor to measure the angle of incidence, angle A, and the angle of reflection, angle B.  Lastly, we recorded the measurements in our notebook and repeated the process 9 more times.  I expected that angle A would be the same as angle B, but in our experiment this was not true.  

4.  Water reflection.  We tested this by shining the laser pointer in the clear, plastic pan when it was empty and dry.  The laser reflected off the pan onto the ceiling.  Then, we made a puddle of water on the table (a low focus object) and reflected the laser off the puddle.  It also reflected off the puddle and onto the ceiling.  When we added water to the pan, it made two dots on the ceiling in different spots.  One was large and fuzzy, and the other was smaller and clearer.  I think this is because some of the rays hit the surface of the water and bounced directly onto the ceiling creating the small clear dot.  Other light rays traveled further, through the water, and reflected off the bottom of the pan.  If the water wasn't perfectly still, the rays may have changed direction somewhat as they reflected off the bottom of the pan and up through the surface of the water.  This would explain the larger, less clear spot.  

Saturday, September 26, 2009

How do light rays travel?

What science ideas did you learn?

This week we learned a lot of science ideas. First we wanted to find out how we could see a marker. Does the light hit our eyes and then the marker, does the light hit the marker and then reflect into our eyes, or does light have nothing to do with it at all and we can just see the marker. Next we wanted to find out why when the candle light went through the small hole, it showed up on the wall upside down. Then, when the light went through the hole bigger than the flame, the spot on the wall was the shape of the bigger hole. Last, we wanted to find out why when we shined the laser pointer on a mirror, the dot on the mirror was extremely small, but the reflected dot on the wall was much bigger than usual.

How did you learn these ideas?

We immediately were able to cross off the idea that light had nothing to do with us seeing the marker.  We already did an experiment to test if we could see without light, and none of us could.  We couldn't quite think of a way to test the other hypotheses of how we could see the marker.  Our hypothesis for the candle light going through the hole in the cardboard was that the light rays cross.  The top rays go down, and the bottom rays shine up.  This is why the reflection on the wall appears upside down.   We wanted to know if the light rays crossed before or after the hole in the cardboard.  We tested this by having someone slide their finger in front of the hole to see what affect the shadow had on the reflection.  (see illustration)  Since the reflection of the candle flame was upside down, we could tell at what point the light rays crossed.

Why is it important to know this idea (What real world application is there)? 

It is important to understand how light rays travel and reflect on objects enabling us to see images.  If we didn't understand this, important technology we use every day would not exist.  The microscope works by shining an intense light through a small object into an objective lens which is magnified by the ocular lens so we see the object clearly.  The microscope allows us to see organisms smaller than our eyes could see, such as bacteria or paramecium.  Science and medicine would not be the same without the microscope.

Another important technology using our understanding of how we see is the telescope.  Unlike the microscope which has its own light source, the telescope works by gathering its light from dim, far away objects with a very large objective lens.  We use telescopes, like the Hubbell telescope, to explore objects in deep space otherwise invisible to us.  

Friday, September 18, 2009

Light

What science ideas did you learn?

I learned that air particles could either be invisible and not reflect the laser pointer, or the air particles could reflect but be too small for our eyes to see the reflection. I also learned that there may be one  ray of light coming from one point on a light bulb, or millions of rays coming from one point on a light bulb. I believe that there are millions of rays coming from one spot making it seem as if it were one big ray. We also had the ideas that you either could not see in the dark, or that your eyes would eventually adjust.

How did you learn these ideas?

I learned these ideas in many ways. I learned them in class discussion, my table, my own observations, and from experiments. For example, the experiment whether you can or can't see without light. We tested it by covering a side of Mr. Finley's desk with a black sheet, turned off all the lights, and put a sign on the inside of the desk. Then we went inside and tried to read the sign. No ones eyes could adjust and no one could read the sign. This led me to believe that there must be a small amount of light to reflect into my eye to allow me to see. 
In the laser pointer experiment we sprinkled chalk and flour above the laser to let us see the laser. The particles of flour and chalk reflected the light from the laser into our eyes enabling us to see the laser beam that was invisible to our eyes before. I concluded that air particles do reflect light but are too small for us to be able to see the reflected light.

Why is it important to know this idea?

It is important to understand how our eyes work. If there is no light to reflect in my eyes, then I can not see. This is important to understand because if injury or disease damage the reflecting lenses in my eyes i would end up blind.  I also understand why it would be important to take a light source into situations without natural light such as deep sea and deep cave explorations. This also explains to me why some animals living in these environments have no eyes or have lost the use of their eyes.

Click on the link below to view a national geographic article about a cave  fish that lost the use of it's eyes: